Micron Optics Scienscope Video Measuring System

The AVM20 software is a PC-based field of view dimensional measurement software that turns a conventional microscope into a powerful measurement station. The software uses the latest digital image processing technology to analyze video images for dimensional measurement. It then compares the measurement to nominal values and tolerances to identify conditions of non-conformance. The software can also be integrated to your application.
The software is for Windows 95, Windows 98 and Windows NT 4.0. It takes advantage of the latest operating systems and provides you a familiar, graphical environment to complete your measurement. The software can be easily linked to other Windows applications, such as spreadsheets and SPC packages. The AVM20 tolerance functions conform to ASME Y14.5M 1994.

The software is designed for image documentation, product inspection and quality control. The software provides a full range of functions for image capture, measurement, archival, image comparison, image and result output. The software is easy to use and it will deliver reliable and repeatable precision measurement results on the hardware of your choice.
 

SPECIFICATIONS

 :: OPTICS

Rugged micro zoom lens with 0.7x - 4.5x primary magnification.

0.35x CCD Coupler

F.O.V.: (based on a 1/3" CCD)

Hi-Mag:
H: 3.04 mm
V: 2.28 mm

Low-Mag:
H: 19.59 mm
V: 14.69 mm

:: CCD Camera

1/3" CCD Color camera with 480 TV Lines of resolution;
768 (H) x 494 (V) pixels. Manual gain and color controls allow for exceptional color reproduction. 12-pin Hirose connector with power and S-Video Out.

:: Base and Focus System

15" x 15" Base with 15" Vertical post (37.5 mm thick). Through hole focus rack with coarse (25 mm) and fine (5mm) focus. Zoom lens coupler slides and locks into end of focus rack.

:: Illumination System

150 Watt fiber optic illuminator with intensity control and a 36" Annular ring light guide. Provides you with shadow free and evenly distributed light.

:: Calibration Target

N.I.S.T. traceable calibration target. 11 concentric circles from 0.005" - 1.00".

:: PC Requirements

Pentium Class Processor

SVGA monitor with 800 x 600 or better resolution

CD-ROM drive

32 MB RAM

Hard drive with minimum 20 MB free space

Windows 95/98, Windows NT 4.0 or later

PCI slot for video card

 

 

Micron Optics, 240 Cedar Knolls Road , Cedar Knolls, NJ 07927

E-Mail

973-267-5799 phone

973-267-6598 fax

 

*GIF animation at top is a conoscopic image of quartz captured through an E600pol microscope using the Nikon DXM-1200 digital camera.  Courtesy of Daniel Sparling, former employee and now clergyman in training